This is my first laser engraver, i call it "BE100" for "Baby Engraver" with 100x108 for the bed size.
Technical informations:
Bed size: 100x108mm
Speed:0,01mm/s - 8mm/s maximum
Magnetic Bed: Yes
Led built-in: Yes
Laser: 1500mW (Blue-Purple Light 405nm)
Step motor: 28BYJ-48
Machine size: Wide=192mm, Deep= 162mm, Heigh= 188mm
Glasses Protection: Compatible with Blue-Purple Laser Light, between 200-540nm
The Negative point with my machine it's the engraving quality depending of the lead screws, Bended lead screw = wobble engraving
I made a second version with the same design chassis, I call it SE120, Quality and precision, large bed, limit switches, PWM/TTL laser module, bluetooth and a lot of new thing.
BE100 Firmware: https://drive.google.com/file/d/1QrE47tHwHnZGa23dKdWtc4cNpt8DPMEl/view?usp=sharing
Small Engraver SE120: https://www.thingiverse.com/thing:4046262
| Base_Arriere.stl | 205.8KB | |
| Base_Avant.stl | 142.4KB | |
| Firmware_BE100.zip | 690.7KB | |
| Guide_Fils_1.stl | 66.7KB | |
| Guide_Fils_2.stl | 16.6KB | |
| Pied.stl | 1.6MB | |
| Plateau.stl | 111.2KB | |
| Portique_Droite.stl | 133.7KB | |
| Portique_Gauche.stl | 95.1KB | |
| Support_Arduino.stl | 88.6KB | |
| Support_DC_StepDown.stl | 3.9KB | |
| Support_Laser.stl | 168.2KB | |
| Support_LED.stl | 83.1KB |
