Hi, Everyone
This is the first prototype that my friend (Jaredman) and I collaborated on. It can be used to store tiny things, like jewelries, screws, beads, etc. Hope someone finds it useful.
Connector thingie TIP:
You can scale the print to your liking, but if you're going to print the cube as is, you don't need to print connectors for it, you can just cut about 1cm from a 1.75mm filament and use as connectors (not sure what the right term is)
| Connectors.stl | 499.2KB | |
| Cube.stl | 3.8MB |
