Mini JDM (Japanese) license plate adapter I made for mounting US plates on my kei truck (Honda Acty). There are larger models for full bars to hold plates, but I wanted something small and material efficient I could print on my available build surface.
You'll need 2 of these printed per plate you want to mount, plus the following hardware for EACG adapter, so multiply these requirements by the number of them you print:
1x M5 nut
1x M5x15mm bolt (I believe I used 15mm long ones?), head is your preference, I used panheads
1x M6x15mm bolt, countersink head,
Insert the m6 nuts in the holes on the adapters, then the countersink M6 (whose length really depends on your vehicle) connects to the vehicles plate holes, then just position the pieces pointing in at a slight downward angle, and mount your plates to the adapters with the m5 bolts (might want a little blue thread locker for security, or you can use longer bolts and a lock washer).
I used PETG for durability and weather resistance.
| mini_JDM_plate_adapter.stl | 849.5KB |
