Mini Gold Shaker Table 3D Printer Model
The file 'Mini Gold Shaker Table 3D Printer Model' is (stl,zip) file type, size is 4.1MB.
The file 'Mini Gold Shaker Table 3D Printer Model' is (stl,zip) file type, size is 4.1MB.
NOTE: I have not printed and tested yet. My machine is on the fritz, I'll update the files with needed changes if/when I am able to get it printed or get feedback from others that have. Water bar design has NOT been tested.
Mini Gold Shaker Table
Meant to process fine gold from concentrates. Uses rubber bands to create the shaking motion. Can be operated from either side, left or right.
Set supports to 45%, DO NOT USE SUPPORTS FOR THE WATER BAR
Use rubber bands on side posts, can connect to only back post for sharp movements or connect to both front and back posts to soften the return stroke. A small amount of glue can be used at the contact point between the tray and the tray holder to reduce sharp strikes.
Front supports can be changed (A/B) to acheive a negative angle.
Change out gear wheels for tuning in the tray throw.
-make sure the orientation of the gear is correct ("R" for right hand, "L" for left hand).
Hopefully it's easy to print, put together, and use.
| base.stl | 489.8KB | |
| gears_complete.stl | 942.4KB | |
| gears_complete_with_handle.stl | 1.0MB | |
| gear_1.stl | 266.0KB | |
| gear_2.stl | 160.0KB | |
| gear_3.stl | 141.2KB | |
| gear_4.stl | 54.0KB | |
| gear_5.stl | 68.4KB | |
| gear_6.stl | 86.3KB | |
| gear_7.stl | 88.4KB | |
| gear_8.stl | 77.0KB | |
| gear_handle.stl | 91.5KB | |
| lever.stl | 249.3KB | |
| mini_gold_shaker_table.zip | 2.3MB | |
| support_arm.stl | 101.4KB | |
| support_complete.stl | 191.3KB | |
| support_front_long.stl | 100.4KB | |
| support_front_short.stl | 74.7KB | |
| support_link.stl | 67.6KB | |
| support_slider.stl | 103.9KB | |
| tray_flat.stl | 31.0KB | |
| tray_holder.stl | 264.1KB | |
| tray_riffles.stl | 57.2KB | |
| tray_riffles_closed.stl | 62.0KB | |
| water_bar_bar.stl | 499.8KB | |
| water_bar_complete.stl | 707.1KB | |
| water_bar_horiz_support_L.stl | 87.7KB | |
| water_bar_horiz_support_R.stl | 157.2KB | |
| water_bar_knob.stl | 207.5KB | |
| water_bar_vert_support_L.stl | 18.4KB | |
| water_bar_vert_support_R.stl | 18.4KB |
