Small cross tweezers for soldering helper at narrow section.
Easy print and easy assemble!
Clamping force is slightly weak but can hold 2 cent coin vertically.
Whole length :54 mm
The tip is so thin that may not aligned correctly.
It should be cut off or sock something after print as you need.
I really inspired from Joo's simple cross tweezer (https://www.thingiverse.com/thing:25587)
Thanks!
29/Apr/2018
Add thicker tip(1mm) type.
| joint.stl | 47.2KB | |
| main.stl | 7.8KB | |
| main_thick.stl | 8.2KB | |
| Mini_cross_tweezers.stl | 62.6KB | |
| Mini_cross_tweezers_Thick_ver.stl | 63.4KB |
