Mini Apple IBook G3 Laptop 3D Printer Model Free Download

Description Files (11)

Summary

Remember that time that Apple went through their Shampoo Bottle phase of design? Good times...

This is a slightly complex build due to the working hinge. You will need a paperclip to work as the hinge pin.

Print the parts with _color in their name in whatever color you like, the keyboard and mouse pad in white, and the rest in natural PLA if you can - otherwise white is fine.

Glue the color parts to the partner first.
Glue one of the hinge parts to the bottom assembly. Then straighten out the paperclip, and pass it through the top assembly, and into the hinge part you glued in step 1.
Cut the paper clip so that it is about 3mm (1/8") part the end of the hinge at the top assembly. Then insert the other bottom hinge part into the clip, and glue it in place (it's a bit tricky, but just go slow and you will get there).
Once it's all glued and working, apply the stickers and the screen label.

Too lazy to print your own? Buy one from our store http://store.rabbitengineering.com

body_bottom_color.stl	358.8KB
body_bottom_hingeL.stl	72.6KB
body_bottom_hingeR.stl	71.3KB
body_bottom_main.stl	205.3KB
body_top_back.stl	261.3KB
body_top_front_color.stl	338.9KB
handle_color.stl	45.6KB
keys.stl	104.5KB
labels.pdf	472.1KB
mouse_pad.stl	25.5KB
screens.pdf	188.1KB

Mini Apple IBook G3 Laptop 3D Printer Model

Summary

Tags

You might also like