MINECRAFT PINS! 3D Printer Model
The file 'MINECRAFT PINS! 3D Printer Model' is (stl) file type, size is 74.6KB.
The file 'MINECRAFT PINS! 3D Printer Model' is (stl) file type, size is 74.6KB.
These are Minecraft pins you can use to hang things and decorate your walls! Enjoy!
These use pins from normal plastic thumbtacks, carefully smash or heat the plastic part to extract the small tack.
There are 3 ways to print these:
-SIMPLE: print with the pin slot facing upwards and place the pin in after with superglue.
-HALF: print with the pin slot facing upwards and glue the 2 halves together encasing the pin.
-EMBEDDED: use your slicer to determine the last layer that you can pause the print and place the pins embedding the pins cleanly. (this method is shown in the video)
Design/print/paint timelapse video: https://youtu.be/4t6ze6BNeDg
| embeddedarrow.stl | 16.1KB | |
| embeddedaxe.stl | 13.8KB | |
| embeddedpickaxe.stl | 13.8KB | |
| embeddedshovel.stl | 13.8KB | |
| embeddedsword.stl | 14.9KB | |
| embeddedswordangled.stl | 15.4KB | |
| halfarrowA.stl | 16.1KB | |
| halfarrowB.stl | 16.1KB | |
| halfaxeA.stl | 14.3KB | |
| halfaxeB.stl | 14.3KB | |
| halfpickaxeA.stl | 13.8KB | |
| halfpickaxeB.stl | 13.8KB | |
| halfshovelA.stl | 13.8KB | |
| halfshovelB.stl | 13.8KB | |
| halfswordA.stl | 15.5KB | |
| halfswordangledA.stl | 15.4KB | |
| halfswordangledB.stl | 15.4KB | |
| halfswordB.stl | 15.5KB | |
| simplearrow.stl | 15.5KB | |
| simpleaxe.stl | 13.8KB | |
| simplepickaxe.stl | 13.2KB | |
| simpleshovel.stl | 13.2KB | |
| simplesword.stl | 14.9KB | |
| simpleswordangled.stl | 15.1KB |
