Milwaukee M12 Battery Mount 3D Printer Model
The file 'Milwaukee M12 Battery Mount 3D Printer Model' is (stl) file type, size is 559.00 KB.
The file 'Milwaukee M12 Battery Mount 3D Printer Model' is (stl) file type, size is 559.00 KB.
Created this battery storage device for Milwaukee M12 Batteries. This is made to be mounted facing up or facing down, with batteries clicking into the slots to stay in place. Both files are the same, but one has the decal set for mounting facing up, while the other is set for mounting facing down. Holds four batteries. No supports needed, printed facing upwards, 10% infil, 4 walls. Designed for exterior or interior screws. 12" long, 3" wide, 2" high. Made this for only the smaller of the M12 batteries, not sure if the "Fat" version will work with this. If you do print this and have access to a "fat" battery, let me know in the comments if it works or not.
Scale to 2540% in slicer for full size.
| M12_Battery_Mount_Array_Down_v3.stl |
| M12_Battery_Mount_Array_Down_x_3_v3.stl |
| M12_Battery_Mount_Array_Up_v3.stl |
| M12_Battery_Mount_Array_Up_x_3_v3.stl |
