Milwaukee Case Hanger 3D Printer Model
The file 'Milwaukee Case Hanger 3D Printer Model' is (stl) file type, size is 93.5KB.
The file 'Milwaukee Case Hanger 3D Printer Model' is (stl) file type, size is 93.5KB.
This is a simple Milwaukee Case holder. I designed it to print easily and still be strong enough to hold the cases as well as the slight bending. Additionally, it was designed to be secured with M3.5 screws.
(UPDATE)
4 years later, I finally optimized the design to print faster and cost less filament.
The updated versions work just as well as the old versions.
Additionally, per request, I added a version that has the holes spaced 1" from each other.
This requested version comes in the old and new versions.
Note:
I no longer have a functioning 3D printer and I'm not going to be getting back into 3D printing anytime soon. The versions of the case holder with the original spacing (not the 1" spacing) were tested and worked well. Unfortunately, the 1" spacing versions will not be tested by me.
| Milwaukee_Case_Holder.stl | 138.1KB | |
| Peg_Case_Holder_Without_Markings_OLDER_VERSION.stl | 39.1KB | |
| Peg_Case_Holder_Without_Markings_OLDER_VERSION_with_1inch_spacings.stl | 39.1KB | |
| Peg_Case_Holder_Without_Markings_UPDATED.stl | 84.3KB | |
| Peg_Case_Holder_Without_Markings_UPDATED_with_1inch_spacings.stl | 94.6KB |
