Miller Rock Racer 3 Gear Skid Plate 3D Printer Model
The file 'Miller Rock Racer 3 Gear Skid Plate 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Miller Rock Racer 3 Gear Skid Plate 3D Printer Model' is (stl) file type, size is 1.6MB.
This is a skid plate for the RC4WD Miller Rock Racer to swap to a standard axial style 3-gear transmission. This should maintain the stock suspension mounting and geometry, links, etc.
I do not have the complete Miller rock racer RC, only the cage, but I expect this will not allow you to retain the stock interior. Other modifications may be required as well, I just don't have the car to test with. I made this after seeing some other users having ongoing issues with the stock transmission in their miller cars.
The included spacers are intended to fill the cage sides where the skid mounts.
UPDATE - After some feedback I added a relief in the rear of the skid for driveshaft clearance. This should give clearance when using a standard 3 gear transmission. If using a wraith style trans with the longer rear output the original design should clear.
| Miller_3gear_skid_v2.stl | 3.9MB | |
| Miller_3gear_skid_v3.stl | 3.9MB | |
| miller_skid_spacers.stl | 298.3KB |
