Draw military letters with a pen, pencil or paint marker using the Black Ops One font

The letters are 1cm high and have 2mm letter spacing.

Sinking:

• The model is 1 mm high for structural integrity.
• To work with very thin pens, you can sink it by 0.4 mm, reducing the height to 0.6 mm.

Scaling:

• Down Scaling: Not advised, as the separators within the letters are precisely 0.4 mm wide. And the letters are hard to fill with ball pens already now.
• Up Scaling: Easy to achieve by adjusting the x and y axes proportionally to the desired letter height. For instance, to increase from 1 cm to 2 cm, scale by a factor of 2 to 200%.
  150% version with 15mm letters is supplied in the file section.
• Using ball pens and other thick pens: Will need the 150% enlarged version to work.

Print Advice:

• Print the first layer very slowly (10-15 mm/s), as slow as your filament allows for optimal quality.

Font licensing:

The font Black Ops One was created by James Grieshaber & Eben Sorkin and published on google fonts under the OFL.

If you want to support my work, please check my other models!

I do very niche projects mostly. Thus, understandably, only few of my models become popular.
But chances are high that you can find inspiration from my specialized works.

Thank you and happy printing!