I have a lot of these clear boxes they are 4.717"x 3.64"x1.011" inches (that's not exact measure) but close. I wanted to organize my small parts for hobby and the nuts and bolts I have. I also made a divider for the nuts and bolts it makes 8 compartments. these are meant to be stacked they have holes on the bottom and pegs on top there is a lip on the front so they don't just randomly fall out and as you can see in the pictures they are very handy I will be making a lot more. the clear boxes make it great to see what you have just from looking at the front there are also opening on the sides and back so you can see in.
please let me know what you think so i might improve on it if needed.
PRINTING: I did mine at 5% infill there was some stringing on the bridging so you might want to adjust for faster print speeds on that depending on your printer, lowest resolution is ok as for me it takes an hour to print one so add as many as you can on the printbed.
deviderfull_-_devider_repaired.stl | 51.1KB | |
mikeshelf.stl | 85.1KB |