MiG-29 Card Kit – For Laser Cutters
The file 'MiG-29 Card Kit – For Laser Cutters' is (svg) file type, size is 7.5KB.
The file 'MiG-29 Card Kit – For Laser Cutters' is (svg) file type, size is 7.5KB.
Here is Nakozen's MiG-29 card kit modified to be cut on a laser cutter.
Scaled for 3mm material, I have only cut this from ply but it should work for other materials too
After cutting the parts pop out fairly easily from the sprue, but if they don't a small pair side cutters should do the trick. Some light sanding may be required to remove the burs left behind, but these are purely cosmetic and don't effect the assembly of the kit.
The finish is a tad bit loose, and a small drop of glue on each part my be required to keep the kit together.
| MIG-29_Laser_1.svg | 18.4KB |
