MIcroscope Stand For Banggood/Ebay/Aliexpress Microscope 3.6 Mega Pixel 3D Printer Model
The file 'MIcroscope Stand For Banggood/Ebay/Aliexpress Microscope 3.6 Mega Pixel 3D Printer Model' is (STL) file type, size is 90.9KB.
The file 'MIcroscope Stand For Banggood/Ebay/Aliexpress Microscope 3.6 Mega Pixel 3D Printer Model' is (STL) file type, size is 90.9KB.
Updated STL Microscope_Stand_Scope_Holder 2-1 and 2-2 on 03-11-2017, please download again if downloaded earlier.
After searching for good adjustable stand for my microscope in thingiverse , I didn't find one so I made this microscope stand which similar to stand sold in Aliexpress for 25USD, It requires M3 Hex bolt and nuts to fasten the microscope holder, Also required M5 square nut and bolt which for tensioning the rack and the gear or to fix the height. I used 6MM diameter rod to push fit the gear and the adjustment wheel.
I printed in ABS on my Flash Forge Creator Pro, I always use 3M glue stick and glass bed.
It is working great, hope you all like it.
| Microscope_Stand_-_Cap-1.STL | 15.7KB | |
| Microscope_Stand_-_MBM_Pinion-1.STL | 85.2KB | |
| Microscope_Stand_-_Part2-1.STL | 67.3KB | |
| Microscope_Stand_-_Part3-1.STL | 33.1KB | |
| Microscope_Stand_-_Part4-1.STL | 45.4KB | |
| Microscope_Stand_-_scope_holder-1_Body2-1_-_Body1_1-1.STL | 106.0KB | |
| Microscope_Stand_-_scope_holder-1_Body2-1_-_Body2-1.STL | 75.5KB |
