Microscope Adapter For Apple IPhone 4 Or 4s Camera 3D Printer Model Free Download

3D Printer Models

Microscope Adapter For Apple IPhone 4 Or 4s Camera 3D Printer Model

Author: @FlorentBonnefoi

License: CC BY-NC

File formats: stl

Download type: zip

Size:101.4KB

The file 'Microscope Adapter For Apple IPhone 4 Or 4s Camera 3D Printer Model' is (stl) file type, size is 101.4KB.

Description Files (4)

Summary

2-parts microscope adapter for iPhone 4 or 4s. Designed to fit classic zeiss ocular or any other with 24 to 28mm diameter.

This adapter has been printed and tested on various microscopes.
Files are manifold. In some cases, you may need to adjust position between part 1 and part 2, so that the lenses are aligned.
The next iteration will make this step easier.

P.S. : The iPhone featured above was not broken during testings ;)

[UPDATES]
14/11/2013

Added STL file OcularSupport_V6.2_kpl_RDM.stl : suited for Zeiss KPL and other 27,8mm diameter (long barrel) oculars. This file has an oversized barrel holder to correct plastic retraction when printed with extruded plastic. You should use this file if you own a reprap.
Added pictures of the above new print (ABS) fully assembled with part 1 (iPhoneAdapter ) and a Zeiss KPL W16 ocular.

11/11/2013

Added STL file support_V6_kpl.stl : this alternate ocular support is designed to fit Zeiss KPL oculars. It was printed in ABS, but doesn't take into consideration plastic retraction (about 5%). So the ocular holder may seem to tight when printed with a reprap.
Added pictures of the above new print (ABS)

IphoneAdapter_complete.stl	46.9KB
OcularSupport_V6.2_kpl_RDM.stl	79.4KB
supportobjectif_V5_repaired.stl	75.1KB
support_V6_kpl.stl	82.4KB

Microscope Adapter For Apple IPhone 4 Or 4s Camera 3D Printer Model

Summary

Tags

You might also like