Versatile unit to hold a phone, tablet, or screen with VESA 100 mount to a microphone stand.
Multiple configurations using adjustable arms to support larger screens/tablets, and arms can be mounted facing backwards to allow rubber bands or other straps as needed for tablets/screens that are too wide.
I printed the base, arms, and support bar with carbon fiber PETG, with TPU for the clamps. The base, clamps, and knobs have openings to pressure fit M3 nuts, and you will need a selection of M3 bolts or screws (mostly 15-20 mm, with 45-50 mm for the clamps).
I use this with my phone and also with a very large tablet (Samsung S8 Ultra, 14.6 inch diagonal screen), but you can resize the stand and arms if needed for larger tablets.
2023-11-23: added hole in stand for 2.5 mm Allen wrench if you want to keep a wrench on the stand for easier adjusting.
2023-11-30: added 120 mm long arms and deeper tray to support larger tablets.
| 100_mm_arm.stl | 36.0KB | |
| arm_washer.stl | 50.3KB | |
| large_clamp.stl | 31.7KB | |
| large_knob.stl | 109.5KB | |
| Microphone_stand_VESA_100_adapter.stl | 164.0KB | |
| Microphone_stand_VESA_100_adapter_120_mm_arm.stl | 50.6KB | |
| Microphone_stand_VESA_100_adapter_deeper_tray.stl | 49.9KB | |
| small_clamp.stl | 32.6KB | |
| small_knob.stl | 109.5KB | |
| tablet_or_phone_stand.stl | 50.0KB |
