Microjig Dado Jig 3D Printer Model
The file 'Microjig Dado Jig 3D Printer Model' is (stl) file type, size is 55.5KB.
The file 'Microjig Dado Jig 3D Printer Model' is (stl) file type, size is 55.5KB.
I designed this based off of the Microjig Dado Stop.
This is a work in progress.
To fully use this, you must also have the following:
5/16 nuts: https://www.amazon.com/Hillman-Group-150006-Finished-100-Pack/dp/B000BQ81D6/ref=as_li_ss_tl?ie=UTF8&qid=1500394253&sr=8-2&keywords=5/16+nuts+and+bolts&linkCode=sl1&tag=es06148-20&linkId=68c538502d379245f51514f94a90529a
1" long 5/16 bolts: https://www.amazon.com/Hillman-Group-150006-Finished-100-Pack/dp/B000BQ81D6/ref=as_li_ss_tl?ie=UTF8&qid=1500394253&sr=8-2&keywords=5/16+nuts+and+bolts&linkCode=sl1&tag=es06148-20&linkId=68c538502d379245f51514f94a90529a
CA glue (super glue): https://www.amazon.com/Hillman-Group-150006-Finished-100-Pack/dp/B000BQ81D6/ref=as_li_ss_tl?ie=UTF8&qid=1500394253&sr=8-2&keywords=5/16+nuts+and+bolts&linkCode=sl1&tag=es06148-20&linkId=68c538502d379245f51514f94a90529a
Even though the nuts and bolts will be a tight fit, it's a good idea to glue them in place.
You'll also need a clamp to attach it to your table saw fence: https://www.amazon.com/Hillman-Group-150006-Finished-100-Pack/dp/B000BQ81D6/ref=as_li_ss_tl?ie=UTF8&qid=1500394253&sr=8-2&keywords=5/16+nuts+and+bolts&linkCode=sl1&tag=es06148-20&linkId=68c538502d379245f51514f94a90529a
Please let me know if you try this out and tell me how it works for you!
| Knob.stl | 139.3KB | |
| Leg1-1.stl | 27.2KB | |
| Leg2.stl | 24.0KB | |
| New_Body.stl | 28.6KB |
![Maakmake] Camel Partition Hanger 2 3D Printer Model](https://res.3axis.co/088bdf23-101c-4cbd-8ec1-d99504faa31f/images/198e2ea2-3600-4ee6-8823-90e1b1e3655b_thumb.jpg)
