MicroCube 3D Printer Model
The file 'MicroCube 3D Printer Model' is (STL,h,pdf) file type, size is 2.0MB.
The file 'MicroCube 3D Printer Model' is (STL,h,pdf) file type, size is 2.0MB.
It is recommended to use the CoreXY version with Nema17 stepper motors instead of the H-Bot as the speed and quality is significantly better.
Link to MicroCube CXY:
https://www.thingiverse.com/thing:3222004
The MicroCube is a small, inexpensive 3D printer, designed around the cheap 28BYJ-48 stepper motors (files for Nema17 included except Z axis). The structure of the printer is based on an exoskeleton, which also serves as the smooth rods for the y-axis. The printer type is an H-bot style printer using a fishing line. In order to provide enough torque for the extruder, two steppers are used in series (or single Nema17 version). Due to the limitations of the 28BYJ-48 steppers, the precision is limited as well as the print speed (2-3 times slower than a standard printer).
Video of print: https://youtu.be/JlPdN9ktdqY
2016/12/03 Version 1.0 Initial Version
2016/12/07 Video added
2016/12/18 Added Nema17 extruder and X/Y axis components incl. diagonal stabilizer
2016/12/27 Added assembly guide to the files
2016/12/28 Added part cooling fan, increased print quality
2017/04/02 Edited corner Nema17 mounts to also hold Nema14 motors
2017/05/14 Added spool compartment and spool holder
2017/06/05 Added PSU holder for Laptop supply
2018/11/17 Upload of CoreXY version
| Bed_Lever.STL | 38.6KB | |
| Cable_Clip.STL | 26.6KB | |
| Cable_Clip_big.STL | 26.6KB | |
| Configuration.h | 43.1KB | |
| Configuration_-_Nema17.h | 43.1KB | |
| Corner_bottom.STL | 78.3KB | |
| Corner_l.STL | 85.5KB | |
| Corner_middle_motor.STL | 135.0KB | |
| Corner_r.STL | 85.5KB | |
| Corner_stabilizer.STL | 65.3KB | |
| Extruder.STL | 145.2KB | |
| Extruder_Lever.STL | 68.6KB | |
| Extruder_Nem17_axis.STL | 25.1KB | |
| Extruder_Nem17_Mount.STL | 38.0KB | |
| Extruder_Nem17_Mount_strip.STL | 18.8KB | |
| Extruder_Nema17.STL | 88.0KB | |
| Extruder_Nema17_Lever.STL | 68.7KB | |
| Fan_holder.STL | 45.0KB | |
| Hotend_duct.STL | 64.8KB | |
| LCD_holder_bottom.STL | 18.4KB | |
| LCD_holder_side.STL | 20.0KB | |
| Limit_switch.STL | 36.6KB | |
| MicroCube_assembly_guide.pdf | 1.3MB | |
| Motor_corner.STL | 92.6KB | |
| Motor_mount_l.STL | 44.6KB | |
| Motor_mount_Nema14-17_l.STL | 109.8KB | |
| Motor_mount_Nema14-17_r.STL | 109.5KB | |
| Motor_mount_Nema17_l.STL | 69.1KB | |
| Motor_mount_Nema17_r.STL | 69.1KB | |
| Motor_mount_r.STL | 44.6KB | |
| Part_fan_holder_30.STL | 47.3KB | |
| Part_fan_tunnel.STL | 26.4KB | |
| PSU_holder_front.STL | 46.1KB | |
| PSU_holder_rear.STL | 46.1KB | |
| Pulley_15mm.STL | 61.1KB | |
| Pulle_Nema17_15mm.STL | 71.2KB | |
| Ramps_holder.STL | 301.0KB | |
| Spool_holder.STL | 32.9KB | |
| Wire_holder.STL | 15.9KB | |
| x-carriage.STL | 95.8KB | |
| x-carriage_tensioner.STL | 9.1KB | |
| y_carriage.STL | 100.1KB | |
| y_carriage_endstop_trigger.STL | 5.2KB | |
| z_axis_bearing_mount_rod.STL | 100.3KB | |
| z_axis_motor_mount_rod.STL | 124.3KB | |
| Z_axis_platform_mount.STL | 104.2KB | |
| z_motorshaft_shaft_coupler.STL | 54.2KB |
