RCGroups Thread

http://www.rcgroups.com/forums/showthread.php?t=2350336#post30820665

Scad File

Along with the STL's is an easily configurable scad file for making adjustments. The default values are what are used in the Standard design download. Below is a list of the easy adjustments

• Structure Heights
• Motor Size
• Motor Mount Tilt
• Mount Resolution
• Mount Wall
• Flight Controller Mounts (Micro MWC, AfroMini, AlienWii)
• Flight Controller Position

Specs

MTM: 117mm
Motor: 6 – 8.5mm
Weight: 6.5 – 8g
License: Creative Commons - Attribution - Non-Commercial

Download

The following STL's have a resolution of 24 without a Flight Controller Mount.
All of the STL's are also available at http://redbird.club/download/gains/micro

Scad File
micro_hex.scad

6mm Motors
micro_hex_m6_standard.stl (Standard Design)
micro_hex_m6_10deg.stl (10º Motor Mount Tilt)
micro_hex_m6_15deg.stl (15º Motor Mount Tilt)

7mm Motors
micro_hex_m7_standard.stl (Standard Design)
micro_hex_m7_10deg.stl (10º Motor Mount Tilt)
micro_hex_m7_15deg.stl (15º Motor Mount Tilt)

8.5mm Motors
micro_hex_m85_standard.stl (Standard Design)
micro_hex_m85_10deg.stl (10º Motor Mount Tilt)
micro_hex_m85_15deg.stl (15º Motor Mount Tilt)

This design was generally inspired by the iconic Blackout Mini-H and Spider Hex. I shared it with sp3cialk in a rcgroups thread and other people asked for it so here it is.