This is a micro SD card holder keychain. Currently designed to hold 3 cards. Designed by request from a friend. There's another design on Thingiverse that does almost the same thing but holds way, way more stuff. If need more than 3 spaces, feel free to redesign or modify the files (or go check out the Swiss Army Style SD Holder).
I printed at 0.15mm layer height, 15% infill and at 40mm/s.
I used two M2.5 x 8mm screws to hold it all together. And you'll need a keyring of course.
I've split the "stop" from the bottom part in two so I could print this without any overhangs.
It'll mean you gotta glue two parts together in addition to the screw, or you can combine the stop and bottom together as one solid and print with a small overhang. With good cooling and bed leveling, it should print nicely.
| sd-card-keychain-bot.stl | 229.7KB | |
| sd-card-keychain-mid.stl | 54.2KB | |
| sd-card-keychain-stop.stl | 274.1KB | |
| sd-card-keychain-top.stl | 76.3KB |
