Micro SD Card Holder 3D Printer Model
The file 'Micro SD Card Holder 3D Printer Model' is (pdf,stl) file type, size is 55.3MB.
The file 'Micro SD Card Holder 3D Printer Model' is (pdf,stl) file type, size is 55.3MB.
Ever forgot your Micro SD cards at home or in the other bag - or even worst - lost it because they are so small?
The Micro SD Card Holder allows you to protect and carry your cards always with you. The cylindric container (3,8 cm in diameter) can get unscrewed and holds up to 12 Micro SD Cards in the bottom shell. The cards are held by springs, so they do not fall out, even if you turn the bottom part upside down. At the same time the springs only cause gentle pressure - enough to hold the card, but not damage it.
If you want them printed, there is also a Shapeways version at:
https://www.shapeways.com/product/C4AZWZM6W/micro-sd-card-holder-top?optionId=85027628
https://www.shapeways.com/product/M7E3KHANV/micro-sd-card-holder-bottom?optionId=85026103&li=shop-inventory
There is also an alternative design - the Micro SD Ball which is published at Shapeways .
https://www.shapeways.com/product/Z9U7FAGJC/micro-sd-ball-string-top?optionId=83987028
https://www.shapeways.com/product/XEU2M4ZLA/micro-sd-ball-loop-top?optionId=83955248
https://www.shapeways.com/product/YTH7TW9S5/mirco-sd-ball-bottom?optionId=83985161
https://www.shapeways.com/product/3HL9AHPEK/micro-sd-ball-loop-screw?optionId=83988508
| IMG_5338.pdf | 18.9MB | |
| IMG_5339.pdf | 17.5MB | |
| IMG_5340.pdf | 18.0MB | |
| micro_sd_card_holder_-_bottom.stl | 2.1MB | |
| micro_sd_card_holder_-_top.stl | 632.4KB |
