Have upgraded my Micro Magic with a new gooseneck. Have used imbus bolts of M1.6 8 mm long. The ball bearings have an inner diameter of 5mm, an outer diameter of 8mm and are 2.5 mm high.
The mainboom is a carbon pipe with an outer diameter of 5 mm. The connection between de mainboom and gooseneck needs to be printed twice, glued together with 15 mins epoxy and again glued with epoxy into the mainboom.
| Klem_giek.stl | 106.2KB | |
| Lummelbeslag_aansluiting_giek.stl | 100.5KB | |
| Lummelbeslag_final.stl | 281.0KB | |
| Lummelbeslag_giek_5_mm.stl | 61.1KB | |
| Masthouder.stl | 83.9KB |
