Mini Linisher made from an old cordless drill motor.
I paused the print to insert the M4 nuts into the knobs.
The holes in the body are manually tapped M4, but self tapping screws could be used.
Parts
1x Drill Motor 42mm Diameter - 60mm long
2x M4x12mm button head screws (motor fixture)
4x M4x30mm Counter sunk screws (clamp fixture)
2x M4 nuts (table fixture)
2x M4x16mm hex screws (table fixture)
1x DC socket
1x DC motor speed controller https://www.aliexpress.com/item/1005003282197476.html
1x switch to suit 19x12.7mm hole
1x 50mm/2" Dremel sanding attachment https://www.aliexpress.com/item/1005007009409083.html
1x motor shaft to Dremel adaptor
| Linisher_body.STEP | 364.3KB | |
| Linisher_body.STL | 180.4KB | |
| Linisher_clamp.STEP | 48.4KB | |
| Linisher_clamp.STL | 48.3KB | |
| Linisher_knob.STEP | 369.9KB | |
| Linisher_knob.STL | 221.8KB | |
| Linisher_table.STEP | 184.6KB | |
| Linisher_table.STL | 68.6KB |
