Micro Chamfer Plane 3D Printer Model
The file 'Micro Chamfer Plane 3D Printer Model' is (STL) file type, size is 10.5KB.
The file 'Micro Chamfer Plane 3D Printer Model' is (STL) file type, size is 10.5KB.
Needed a very tiny chamfer plane to do some tricky to access corners - this was the result! Works a charm on plastic such as HDPE.
Thanks to the slot in the blade, depth is adjustable - you could probably use it as a tiny block plane if you wanted since the blade at full extension is lower than the base.
You'll need a Swann-Morton No. 17 blade (X-Acto #17 looks very similar, but I don't have one to measure so can't promise it'll fit), an M2.5 screw at least 5mm long, and an M2.5 nut.
Print lying on its side, no supports required.
| MicroPlane_Body_1.STL | 44.0KB |
