Mickey Pumpkin Main St. USA Tealight 3D Printer Model
The file 'Mickey Pumpkin Main St. USA Tealight 3D Printer Model' is (stl) file type, size is 15.1 MB.
The file 'Mickey Pumpkin Main St. USA Tealight 3D Printer Model' is (stl) file type, size is 15.1 MB.
UPDATE(2018/11/04): See below.
Went looking for this or something like it and it couldn't be found. So I made it myself. Started with a nice uniform pumpkin source. The final design isn't perfect, but it's good enough. Might have to make a diffuser for the tea light to make it look it's best.
A bit late in the season, but better late than never.
Make sure to print two of the top_small models, one for each ear pumpkin.
Designed for 36mm tea lights (Ashland from Micheals). Re-cut the hole at the bottom to fit your lights.
Might want to glue the tops on after cleaning out all of the supports.
UPDATE(2018/11/04): Added Diffuser model. See picture. This is for stackinggluing onto the tea light to help it's light reach the full pumpkin height/ears and to block the view through the faces to the other side. Printed using Spiralize mode so it is only 1 layer thick and it's suggested to use a clear PLA if you've got it, but even matching orange PLA might work well as well. LIT pictures are using Diffuser.
| micky_pumpkin_faces_v1.stl |
| micky_pumpkin_top_big_v2.stl |
| micky_pumpkin_top_small_v2.stl |
| tea_light_diffuser_v1.stl |
