My girlfriend wanted a nice looking way to display her tsum tsum collection. We came up with this design, which holds all of her tsum tsums with some room for expansion.
If you have a giant print bed you can print the mickey_full model, but I have an Ender 3, so I created a split version. It prints in 8 pieces, the relative locations are shown in the above picture. After printing all the pieces, I used the connector models and a lot of epoxy to attach everything together.
There are 8 holes in the back at a 30 degree angle to attach the shelf to a wall. You probably won't need to use all of them. I used 4 one step hangers, but you could just use simple nails as well.
| connector.stl | 684.0B | |
| mickey_1.stl | 91.4KB | |
| mickey_2.stl | 114.4KB | |
| mickey_3.stl | 87.1KB | |
| mickey_4.stl | 102.3KB | |
| mickey_5.stl | 90.0KB | |
| mickey_6.stl | 72.4KB | |
| mickey_7.stl | 89.3KB | |
| mickey_8.stl | 103.1KB | |
| mickey_full.stl | 656.1KB |
