This is a 6.5" adapter ring for the MG4. Measurements were taken of the holes on the front doors and test fitted on my vehicle. Adapter is 34mm in height.
Longer screw are required for mounting to the door as I've made the mounting points thicker for strength.
For mounting the speaker, drill holes on the top surface and superglue the hole and wood screw before threading.
For speaker cables, i drilled 2 small holes on the side of the adapter to feed to the existing connector.
Enjoy.
| MG4_Front_Speaker_Adaptor_34mm_Rev0.STL | 62.4KB |
