Mfd Crosswind Mini 1600 Nacel Aero Cover 2317 Motor 3D Printer Model
The file 'Mfd Crosswind Mini 1600 Nacel Aero Cover 2317 Motor 3D Printer Model' is (stl) file type, size is 15.4KB.
The file 'Mfd Crosswind Mini 1600 Nacel Aero Cover 2317 Motor 3D Printer Model' is (stl) file type, size is 15.4KB.
Here is a basic functional cover for the mfd crosswind mini motor nacels.
by design they have a big square flat face behind the motor, this removes it but leaves a slight gap for airflow to the esc and motors.
This is directional, you will see when fitting that 1 side fits fine the other the motor will rub, this is due to the shape of the wing itself and direction of airflow.
these fit the 2317 motors, it will fit thinner motors and longer motors but not wider, wider motor mount can be edited yourself or if requested i will make more.
0.2mm
tree supports
print as seen in the photo with the square at the bottom.
super low infill to keep weight down, it doesnt need to be strong.
push fit but recommended a little bit of e6000 or similar glue just to ensure it doesnt fall out in flight.
| mfd_crosswind_mini_nacel_aero.stl | 51.6KB |
