MFD Crossbow Mini Tracker Brace 3D Printer Model
The file 'MFD Crossbow Mini Tracker Brace 3D Printer Model' is (stl) file type, size is 67.6KB.
The file 'MFD Crossbow Mini Tracker Brace 3D Printer Model' is (stl) file type, size is 67.6KB.
This is a brace for the My Fly Dream Crossbow Mini antenna tracker. It's largely based on the file from shannonmbaker, and posted as a remix accordingly. This one attaches with the two M3 screws and the bottom, and also the two M2.5 screws at the sides for added support. It also sits 1.5mm tighter to the bearing to better hold the bearing in place in the aluminum parts. I could be just some variance in the parts that make up the tracker, but the original file was a bit far away and let the bearing float around in mine, hence my need to make this one. You'll need longer screws of course! Print with supports under the stepped screw holes.
| MFD-Brace.stl | 257.5KB |
