MF01 Squonk Mod 3D Printer Model
The file 'MF01 Squonk Mod 3D Printer Model' is (stl) file type, size is 42.0KB.
The file 'MF01 Squonk Mod 3D Printer Model' is (stl) file type, size is 42.0KB.
Naked squonker, just 39x24x72mm, one piece, 18650 battery.
Best printed in nylon 100 μm, sls process.
What do you need:
-510 squonk connector 22mm, m10 thread (best with 1mm thick washer)
-piece of copper 0.5mm thick, approx 34x80mm
What do you have to do:
-cut two (or three, optional) pieces of copper according to contacts image
-drill a 10mm hole into the negative strip
-put both negative and positive strips into the mod along with the 510 connector
-put a battery, a bottle, screw an atomizer
-you're done, vape and enjoy
This is a fully mechanical mod, so be aware!
Don't go too low with your own build
Cheers
| mf01SquonkMod.stl | 125.2KB |
