Screws and Nuts M3-M8, T-Nut for 3030 and 2020 Profiles
With the Slicer or 3D Cad program you can easily separate all parts.
These parts are for construction to have the right size.
I created the parts especially for Tinkercad.
Since my STL is very popular on Tinkercad, I thought I'd provide them here as well.
| Cylinderhead_screw_M3.stl | 612.8KB | |
| Cylinderhead_screw_M3_negativ.stl | 24.9KB | |
| Cylinderhead_screw_M4.stl | 238.3KB | |
| Cylinderhead_screw_M4_negativ.stl | 24.9KB | |
| Cylinderhead_screw_M5.stl | 219.4KB | |
| Cylinderhead_screw_M5_negativ.stl | 24.9KB | |
| Cylinderhead_screw_M6.stl | 255.3KB | |
| Cylinderhead_screw_M6_negativ.stl | 24.9KB | |
| Cylinderhead_screw_M8.stl | 272.0KB | |
| Cylinderhead_screw_M8_negativ.stl | 24.9KB | |
| Hex_negativ_M3.stl | 21.1KB | |
| Hex_negativ_M4.stl | 21.1KB | |
| Hex_negativ_M5.stl | 21.1KB | |
| Hex_negativ_M6.stl | 21.1KB | |
| Hex_negativ_M8.stl | 21.1KB | |
| Metric_nuts_and_screws_1.stl | 5.7MB | |
| Nut_M3.stl | 149.3KB | |
| Nut_M4.stl | 142.9KB | |
| Nut_M5.stl | 145.3KB | |
| Nut_M6.stl | 145.1KB | |
| Nut_M8.stl | 153.3KB | |
| Screw_hex_M3.stl | 339.4KB | |
| Screw_hex_M4.stl | 235.7KB | |
| Screw_hex_M5.stl | 378.7KB | |
| Screw_hex_M6.stl | 384.8KB | |
| Screw_hex_M8.stl | 298.8KB | |
| T_Nut_2020.stl | 16.7KB | |
| T_Nut_2020_double.stl | 31.0KB | |
| T_Nut_2020_large.stl | 30.6KB | |
| T_Nut_2020_small.stl | 16.6KB | |
| T_Nut_3030.stl | 30.4KB | |
| T_Nut_3030_double.stl | 46.1KB |
