Collection of bolts M8 Bolts and corresponding Nut.
I got good results with %50 infill and .2 mm layer height. For sturdier Bolts I recomment 100% infill.
Bolts and Nuts have 2 mm thread pitch.
Thanks for BloodyPeanuts for his/her comments. He achieved better result with following settings:
Nuts as-is with 60% infill
Bolts at 93% scaling for x and y and 100% for Z with 100% infill
| Bolt_M8.stl | 506.4KB | |
| Bolt_M8_100.stl | 506.4KB | |
| Bolt_M8_30.stl | 506.4KB | |
| Bolt_M8_40.stl | 506.4KB | |
| Bolt_M8_50.stl | 506.4KB | |
| Bolt_M8_60.stl | 506.4KB | |
| Bolt_M8_70.stl | 506.4KB | |
| Bolt_M8_80.stl | 506.3KB | |
| Nut_M8.stl | 132.7KB |
