Collection of bolts M6 Bolts and corresponding Nut.
I got good results with %50 infill and .2 mm layer height. For sturdier Bolts I recomment 100% infill.
Bolts and Nuts have 2 mm thread pitch.
Thanks for BloodyPeanuts for his/her comments. He achieved better result with following settings:
Nuts as-is with 60% infill
Bolts at 93% scaling for x and y and 100% for Z with 100% infill
| Bolt_M6_100.stl | 941.4KB | |
| Bolt_M6_20.stl | 360.7KB | |
| Bolt_M6_30.stl | 297.8KB | |
| Bolt_M6_40.stl | 383.8KB | |
| Bolt_M6_50.stl | 477.5KB | |
| Bolt_M6_60.stl | 558.7KB | |
| Bolt_M6_70.stl | 659.4KB | |
| Bolt_M6_80.stl | 746.0KB | |
| Bolt_M6_90.stl | 852.1KB | |
| Nut_M6.stl | 68.9KB |
