Metal Cabinet (working) For Gloomhaven / Frosthaven 3D Printer Model
The file 'Metal Cabinet (working) For Gloomhaven / Frosthaven 3D Printer Model' is (stl) file type, size is 5.7MB.
The file 'Metal Cabinet (working) For Gloomhaven / Frosthaven 3D Printer Model' is (stl) file type, size is 5.7MB.
This technically isn't a remix, but my design was inspired by the existing Frosthaven metal cabinet.
I've included a variety of styles of cabinets. Some damage done on them, some pristine. A few different doors, etc.
You can mostly mix and match anything to make what looks right to you. The cabinets can just be printed on their back without supports (except the highly deformed one that doesn't have a flat back). With my Mars 3 printer, I found on rafts at a 30 degree angle produced better and more accurate results though so that the doors fit perfectly.
The doors I couldn't print directly on the build plate as they need very precise dimensions and are very thin. I recommend printing them on rafts on their back-side with a 30 degree angle as well.
The doors have slightly larger tabs on the top side. When assembling, put the top tab in and then gently force the bottom tab in.
Enjoy!
| CabinetDeep.stl | 22.5KB | |
| CabinetDeepNarrow.stl | 17.4KB | |
| CabinetDeepNarrowWithDoorStopper.stl | 18.3KB | |
| CabinetDeepWithStopper.stl | 23.4KB | |
| CabinetShallow.stl | 22.5KB | |
| CabinetShallowWithStopper.stl | 26.5KB | |
| CabinetShelfDeep.stl | 28.1KB | |
| CabinetShelfDeeWithVents.stl | 117.2KB | |
| CabinetShelfDeeWithVentsAndDeformed.stl | 833.5KB | |
| CabinetShelfShallow.stl | 28.2KB | |
| LeftDoorAllDeformed.stl | 2.9MB | |
| LeftDoorAllDeformedWithVent.stl | 1012.7KB | |
| LeftDoorPlain.stl | 1.3MB | |
| LeftDoorWithDent.stl | 287.4KB | |
| LeftDoorWithVents.stl | 338.2KB | |
| RightDoorAllDeformed.stl | 1.0MB | |
| RightDoorAllDeformedWithVent.stl | 1.2MB | |
| RightDoorPlain.stl | 58.2KB | |
| RightDoorWithVents.stl | 338.2KB | |
| WideDoorWithVents.stl | 1.9MB |
