Metal C128D Floppy Lock Plus 3D Printer Model
The file 'Metal C128D Floppy Lock Plus 3D Printer Model' is (stl) file type, size is 1021.6KB.
The file 'Metal C128D Floppy Lock Plus 3D Printer Model' is (stl) file type, size is 1021.6KB.
metal C128D Floppy Lock Plus
Replacement for broken floppy lock on a Commodore C128D (metal version) retro-computer.
Plus stands for the added material surrounding the "half-moon" plug, compaired to the original floppy lock.
The floppy-drive drive should be an 1571 model to fit.
The axis for the floppy mechanics is 15mm long (longer than on 1541-II models for C64)
Best printed in ABS to be strong enough.
Attention:
The inner of the "half-moon" has to be reworked to fit smooth, f.e. by rotary tool.
Don't try to push or force the plug on the floppy mechanics - they may get damaged!!!
Two versions of the lock exist:
1 part lock:
Has to be printed with support (more than one try may be needed to get good results)
2 parts lock:
Can be printed without any support and must be glued together.
Aceton is a perfect glue for ABS plastics.
| 2part_-_metal_C128-floppylock_plus.stl | 1.5MB | |
| metal_C128D-floppylock_plus.stl | 1.5MB |
