This is the first version of a motorcycle handlebars attachment for Meta Quest 3 controllers.

I have many hours in using these with the game VRider SBK, and it makes for a nice immersive control setup. A Quest 2 version is also available as another of my Thingiverse designs. These are not intended for careless use, but are fine for normal gameplay and careful storage.

If you intend to build this, please note a few things:

• your build will probably fail if you do not see the instructional video here: https://youtu.be/ks6KE3Xah6I?si=o8M1LyIHkQVgXV8Q
• If you are new to assembling tight-fitting parts, go slow and maybe print some extra parts...
• this project requires finishing and parts must be trimmed and sanded.
• parts are breakable. Use care when cutting, sanding, and assembling.
• do not rush the job. Take the time to fully smooth all parts, especially where parts fit together.
• if installing steel bearings, make sure to sand the inside of the tube to remove any high spots. If it feels like the bearing will not slide in with medium force, carefully remove the bearing and sand the inside of the tube to achieve a snug fit.
• custom lettering shown in photos and video are not included in the models, but you can add (or subtract) your own using Tinkercad or another 3D modeling application.
• Shaft and Spacer are optional 3D printed parts for the ball bearing setup shown in the video.

• Brake Lever is an optional 3D printed part for the brake lever setup shown in the video.

• additional required parts:

• 36 cm (14 inches) of 27 mm (1 in) PVC conduit or pipe (I use grey PVC conduit and painted it black)

• additional optional parts (brake lever):
  -- M4 X 20 Screw
  -- M4 Locking Nut

• additional optional parts (ball bearing setup):
  -- 2 608 Bearings

Print Details:
Printer: Ender-5 Pro
Slicer: Cura
0.20 mm layer height
20% Infill (Cubic pattern)
Matterhackers PLA and Tough PLA

This design has a non-commercial license, so please do not use it in a commercial manner.

This design uses:

Brake Handle - Bike Brake (Stronger) by 3dpKid
https://www.thingiverse.com/thing:5532339

Bike handlebar grip (knurled) by HeyYoTay
https://www.thingiverse.com/thing:4047581