Meshtastic Lora APRS Case For Lilygo T-Beam, M5 CardKB And Oled 2.4″ 3D Printer Model
The file 'Meshtastic Lora APRS Case For Lilygo T-Beam, M5 CardKB And Oled 2.4″ 3D Printer Model' is (stl) file type, size is 322.0KB.
The file 'Meshtastic Lora APRS Case For Lilygo T-Beam, M5 CardKB And Oled 2.4″ 3D Printer Model' is (stl) file type, size is 322.0KB.
Actually I made a case for my Lora APRS with keyboard and bigger display. I used the Lilygo T-Beam with a 2.4" I2C OLED, the M5stack cardkb and a 18650 Li-Ion.
You have to decide if you flash the Meshtastic Firmware: https://meshtastic.org/downloads/ or the just great LORA_APRS Firmware from richonguzman, link here: https://github.com/richonguzman/LoRa_APRS_Tracker
You can't switch between.
What you need:
1x Lilygo T-Beam, no display: https://www.lilygo.cc/products/t-beam-v1-1-esp32-lora-module
1x I2C Oled 2.4", https://de.aliexpress.com/item/1005005241315177.html?spm=a2g0o.order_list.order_list_main.33.72de1802fpJBpG&gatewayAdapt=glo2deu
1x M5stack cardKB, https://docs.m5stack.com/en/unit/cardkb
2x M3x5 threads inserts
4x countersunk m3x10
10x M2x10 allen screw for keyboard. Please not, I only made 4 holes the case, you can drill the rest with a 1.5mm drill.
4x M2 nuts for the T-Beam holder
4x M2x6 allen screw for the T-Beam
1x 10cm SMA cable, connectors up to you.
1x 18650 Li-Ion
You can find the wall mount holder for this thing here:
https://www.thingiverse.com/thing:6497756
There is also a backplane available where you can mount a Heltec Lora 32:
https://www.thingiverse.com/thing:6506710
Use at your own risk, don't ask me anything, I don't give support, thanks.
| backcase.stl | 278.0KB | |
| batcase.stl | 173.7KB | |
| cardKBtop.stl | 195.0KB | |
| cardKBunderplate.stl | 114.7KB | |
| maincase.stl | 437.0KB | |
| OLEDFrame.stl | 147.7KB | |
| ttgoholder.stl | 215.7KB |
