Meshtastic Birdhouse Node 3D Printer Model
The file 'Meshtastic Birdhouse Node 3D Printer Model' is (stl) file type, size is 14.4KB.
The file 'Meshtastic Birdhouse Node 3D Printer Model' is (stl) file type, size is 14.4KB.
Simple print to attach an enclosure for RAK 19007 to Amazon security cam solar panel.
This is the solar panel I used: https://a.co/d/1mVprlk
Enclosure was glued onto the bottom of the panel using 3m marine adhesive. I designed a tray that slides out for maintenance without having to disturb any bird nests. There's a vent hole in the back big enough to pass a JST extension harness through. I soldered the extension to the existing battery, added a slot to pass it through the existing housing using soldering iron to melt the plastic.
There are two vent holes in the rear, and a couple of small vent slots in the top of the tray which should be fairly weather resistant to keep the RAK cool and also helps insulate/ventilate the bird nest area. There is a small ledge around the bottom to attach wood sides onto. Footprint is appropriate for wren/chickadee nests, and those size birds only require a 1.25" hole to access their nest.
Will update once the woodwork is done for the rest of the birdhouse.
| birdhouse_enclosure.stl | 26.0KB | |
| birdhouse_front.stl | 55.1KB |
