This model is my version of Mercy's healing staff from Overwatch. While not 100% game accurate, this model is extremely close to the in game model, with certain details omitted to ensure durability for long term prop use. This is a pretty involved model and requires a lot of post-finishing to get the look just right. It uses all real hardware rather then printed hardware, here is a list of what you will need to complete this prop.
Staff shaft: https://www.mcmaster.com/#catalog/123/3644/=193xxgi (Order a 5' ABS tube 1 1/4" OD, 1" ID)
Staff inner shaft: https://www.mcmaster.com/#catalog/123/142/=18c6jxb (Order a 2' polycarbonate tube 1"OD, 3/4" ID)
6x M4 1.25" screws
4X M4 .75" screws
Assorted 6-32's and 8-32's button head screws
The fins do articulate, but otherwise this is a static prop. I chose to paint mine in the cobalt scheme but the model is the same as her original white staff. I modeled in channels for LED strips on the inside of the fins if you'd like to simulate the light the staff omits from the game. I intended to install some in mine but ran out of time before the convention I was making this for.
| Cylinder.stl | 1.3MB | |
| Front_wing.stl | 950.0KB | |
| Handle.stl | 2.4MB | |
| Ninjaflex_foot.stl | 163.4KB | |
| Rear_staff.stl | 1.1MB | |
| Rear_wing.stl | 818.0KB | |
| Staff_tip.stl | 1.5MB | |
| Wing_connector.stl | 35.9KB |
![Silenced Pistol [Halo 3: ODST] 3D Printer Model](https://res.3axis.co/756c6abc-c70b-438a-adec-aa1b73efd3d9/images/33fcace9-ca4c-4c4e-92f3-1301f380bb68_thumb.jpg)
![Trench Raider [Sniper Plate And Face Mask] 3D Printer Model](https://res.3axis.co/4603959c-a0a0-4ecb-9060-3391742fca14/images/89603869-dc1f-4627-a3d5-ac5592398b26_thumb.jpg)
