MEOWMERE – Fullsize Terraria Sword 3D Printer Model
The file 'MEOWMERE – Fullsize Terraria Sword 3D Printer Model' is (PDF,STL) file type, size is 261.5KB.
The file 'MEOWMERE – Fullsize Terraria Sword 3D Printer Model' is (PDF,STL) file type, size is 261.5KB.
This is a large scale project. It's taken me the better part of three weeks to break down the sword into printable sections. I have a 200mm square bed, so keep that in mind, this may not fit on all printers.
Print 1 each of all the parts except you can print either 1 MEOWB or 1 each of MEOWB1 & B2. I made it a tongue and groove assembly to let me print it in two nights instead of one whole day.
You will need 2 30mm pegs for the MEOWB to BLADE_BASE_A connection
And finally, 15 of the standard pegs. (17 PEGS TOTAL)
You will also need a lot of crazy glue, primer, paint, etc. I have all but the last two pieces printed. I will post a make when it is completed.
I have printed all the parts with 20% infill and 0.2 LAYERS.
The parts are at a 45 degree angle since I traced the original bitmap from the game. So all the STLs need to be re-oriented.
Enjoy!
| Meowmere_Assembly.PDF | 284.4KB | |
| Meowmere_Blade_Base_A.STL | 15.7KB | |
| Meowmere_Blade_Base_B.STL | 14.1KB | |
| Meowmere_Blade_Base_C.STL | 18.1KB | |
| Meowmere_Blade_Base_D.STL | 19.0KB | |
| Meowmere_Blade_Base_E.STL | 21.8KB | |
| Meowmere_Blade_Base_F.STL | 11.8KB | |
| Meowmere_HILTA.STL | 7.9KB | |
| Meowmere_HILTB.STL | 11.2KB | |
| Meowmere_HILTC.STL | 12.8KB | |
| Meowmere_MEOWA.STL | 19.8KB | |
| Meowmere_MEOWB.STL | 25.3KB | |
| Meowmere_MEOWB_1.STL | 13.8KB | |
| Meowmere_MEOWB_2.STL | 14.1KB | |
| Meowmere_Peg.STL | 684.0B | |
| Meowmere_Peg_30mm.STL | 684.0B |
