Mega Man X Action Figure 3D Printer Model
The file 'Mega Man X Action Figure 3D Printer Model' is (stl) file type, size is 10.9MB.
The file 'Mega Man X Action Figure 3D Printer Model' is (stl) file type, size is 10.9MB.
A fully-posable action figure of X from Mega Man X. This is based on his appearance from the later mainline X games (up to X7). All the parts are designed to simply snap together with no extra hardware needed.
At 100% scale, this figure stands right at 6 inches tall.
The parts are not color separated, so painting may be required.
I printed using PLA at 100% scale, and the joints tend to become loose over time since PLA wears down easily. It may be better to print using ABS or another tougher material, but I have not tested any other materials myself. If your joints become loose, you can use super glue to thicken up the inner part of the joint to make it tight again.
If you wish to print this at a different scale, keep in mind that your joints may come out too tight or too loose depending on the scale.
This figure is unofficial fan art, for personal use only.
| AnkleJoint.stl | 1.1MB | |
| Belly.stl | 1.3MB | |
| ElbowAndKneePin.stl | 21.8KB | |
| FootL.stl | 2.4MB | |
| HandOpenL.stl | 1009.1KB | |
| Head.stl | 1.9MB | |
| HeadYell.stl | 2.1MB | |
| LowerArmL.stl | 930.0KB | |
| LowerArmL_Buster.stl | 984.3KB | |
| LowerLegL.stl | 860.8KB | |
| Shoulder.stl | 1.1MB | |
| ShoulderJoint.stl | 1.1MB | |
| ShoulderPad.stl | 165.1KB | |
| ShoulderWithPadConnection.stl | 1.2MB | |
| Torso.stl | 3.3MB | |
| UpperArmL.stl | 529.2KB | |
| UpperLegL_v2.stl | 547.7KB | |
| Waist.stl | 4.2MB |
