Mega Man! Each Color Is A Separate STL! 3D Printer Model
The file 'Mega Man! Each Color Is A Separate STL! 3D Printer Model' is (stl) file type, size is 85.3MB.
The file 'Mega Man! Each Color Is A Separate STL! 3D Printer Model' is (stl) file type, size is 85.3MB.
Watch the Video here: https://youtu.be/Wf-8becReDs
This is a quick Mega Man model I created in ZBrush as a final project to print on the 3D Printing Nerd's traveling gMax before we had to send it on.
The files for this are a little rough so sorry for that. I'll probably revisit this to clean them up a bit. They're definitely printable and go together, they're just not the easiest to print and require supports.
Here's a list of filaments we used if you want to match the colors:
Dark Blue - Fillamentum Nobel Blue
https://fillamentum.com/collections/pla-extrafill/products/pla-extrafill-nobble-blue
Light Blue - AMZ3D Light Blue
https://www.amazon.com/gp/product/B01CX8ZFJC/ref=s9_dcacsd_dcoop_bw_cr_x__a_w
Skin - AMZ3D Sakura Pink
https://www.amazon.com/1-75mm-Sakura-Pink-Printer-Filament/dp/B01LWMJPNF
Red - Fillamentum Signal Red
https://fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-signal-red
White - AMZ3D White
https://www.amazon.com/gp/product/B01D99PTA4/ref=s9_acsd_hps_bw_cr_x__a_w
Black - Fillamentum Traffic Black
https://fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-traffic-black
| arm_blaster-dark_blue.stl | 17.3MB | |
| arm_hand-dark_blue.stl | 13.1MB | |
| blast-red.stl | 6.4MB | |
| ear-light_blue-x2.stl | 4.1MB | |
| ear-red-x2.stl | 3.0MB | |
| eyes-black.stl | 4.3MB | |
| eyes-white.stl | 5.6MB | |
| face-skin.stl | 26.8MB | |
| helmet-dark_blue.stl | 64.6MB | |
| helmet_large_fin-light_blue.stl | 902.5KB | |
| helmet_small_fin-light_blue.stl | 582.1KB | |
| leg_left-dark_blue.stl | 35.2MB | |
| leg_left-light_blue.stl | 2.1MB | |
| leg_right-dark_blue.stl | 34.3MB | |
| leg_right-light_blue.stl | 1.9MB | |
| torso-light_blue.stl | 10.5MB | |
| underpants.stl | 1.0MB |
