Meeseeks Box 3D Printer Model
The file 'Meeseeks Box 3D Printer Model' is (stl,gcode,f3d) file type, size is 8.9MB.
The file 'Meeseeks Box 3D Printer Model' is (stl,gcode,f3d) file type, size is 8.9MB.
Everyone needs a Meeseeks Box!.
Rick and Morty fans will know how to use the appropriately and responsibly.
Note: Please only request small, achievable tasks.
This is a multi-part print that you will need to build after the individual component pieces are complete. Designed as a multi-color print via layer-hight-based filament changes, be prepared for lots of layer-changing. I used 6 different colors of PLA (listed below) to complete this project.
Included gCode contains the final version prints I used - meaning, layer-height-based filament changes, brims (where needed) and most multiples needed. The only exception are the box sides, you will have to print that multiple times on your own.
Total Print Time: 42h 30m
Assembly Time: 2h 00m
Questions, please ask.
Note: Failure to follow these steps exactly will result in a non-functioning, decorative, Meeseeks box. So, pay close attention if you want a Mr. Meeseeks to help you clean up at the end. Remember just keep your requests simple. They're not gods.
| Meeseeks_Box_-_Button_-_Blue_-_x1.stl | 424.3KB | |
| Meeseeks_Box_-_Button_-_Blue_-_x1_0.15mm_PLA_MK3S_3h30m.gcode | 19.2MB | |
| Meeseeks_Box_-_Button_Housing_v2_-_Any_-_x1.stl | 96.2KB | |
| Meeseeks_Box_-_Button_Housing_v2_-_Any_-_x1_0.15mm_PLA_MK3S_3h21m.gcode | 6.2MB | |
| Meeseeks_Box_-_Button_Ring_-_Black_-_x1.stl | 742.9KB | |
| Meeseeks_Box_-_Button_Ring_-_Black_-_x1_0.15mm_PLA_MK3S_32m.gcode | 1.1MB | |
| Meeseeks_Box_-_Button_v2_-_Blue_-_x1.stl | 422.6KB | |
| Meeseeks_Box_-_Corner_Brace_-_Any_-_1x.stl | 104.5KB | |
| Meeseeks_Box_-_Corner_Brace_-_Any_-_1x_0.15mm_PLA_MK3S_33m.gcode | 956.0KB | |
| Meeseeks_Box_-_Corner_Brace_-_Any_-_8x_0.15mm_PLA_MK3S_3h20m.gcode | 7.2MB | |
| Meeseeks_Box_-_Side-Bottom_-_Multi-Layer-Color_-_x5.stl | 12.4KB | |
| Meeseeks_Box_-_Sides_-_Multi-Layer_-_x6_0.15mm_PLA_MK3S_5h3m.gcode | 4.1MB | |
| Meeseeks_Box_-_Top_-_Multi-Layer-Color_-_x1.stl | 66.9KB | |
| Meeseeks_Box_-_Top_-_Multi-Layer-Color_-_x1_0.15mm_PLA_MK3S_4h31m.gcode | 3.9MB | |
| Meeseeks_Box_v2.f3d | 615.0KB |
