A more appropriate set of drawers for your pleasure. I didn't put dividers in these, but check back and I'll post some universal dividers you can print. Also, the cabinet contains my MadMan (MMT) embossment on the side. I'll post another one without in the days to come.
Meanwhile, ENJOY!
03/25/2020
Uploaded Drawer Dividers. After printing, use a little hot-glue on the ends to hold them in place in the drawer.
| Bolt_Medium.STL | 13.5KB | |
| Cabinet_Medium.STL | 52.9KB | |
| Drawer-0625_Med.STL | 23.1KB | |
| Drawer-0750_Med.STL | 23.1KB | |
| Drawer-0875_Med.STL | 23.1KB | |
| Long_Divider_0625.STL | 103.8KB | |
| Long_Divider_0750.STL | 106.3KB | |
| Long_Divider_0875.STL | 106.3KB | |
| Pull_Med.STL | 325.0KB | |
| Short_Divider_0625.STL | 194.0KB | |
| Short_Divider_0625_Middle.STL | 346.0KB | |
| Short_Divider_0750.STL | 197.2KB | |
| Short_Divider_0750_Middle.STL | 348.6KB | |
| Short_Divider_0875.STL | 198.2KB | |
| Short_Divider_0875_Middle.STL | 349.4KB |
