UPDATE (2021.01.03):I was informed about the issues of some of my designs prints, I will change the files as soon as I can.
The problem was caused by the designing program I used, it makes some parts hollow when cutting them. I could not fix this problem so I need to make the affected buildings again.
I will use this chance to change the floors connecting method to an easyer to print version.
please be patient, thank ou for the understanding
the affected buildings: 5.:T, 6,7.:U, 8.:square
This is the second building type of my medieval town.
This time the upper floor has a real floor in the separate parts version so if you upscale the building you can put things inside.
the first building: medieval house (v shape):
https://www.thingiverse.com/thing:4609511
the third building: medieval house (v shaped wide version):
https://www.thingiverse.com/thing:4610911
the fourth building: medieval house (T shaped bricked wide version):
https://www.thingiverse.com/thing:4611031
the fifth building: medieval house (T shaped wide version:
https://www.thingiverse.com/thing:4611074
the sixth building: medieval house (U shaped bricked wide version):
https://www.thingiverse.com/thing:4611839
the seventh building: medieval house (U shaped wide version):
https://www.thingiverse.com/thing:4611886
the eighth building: medieval house (square shaped version):
https://www.thingiverse.com/thing:4612775
inspired by:
https://www.thingiverse.com/thing:3857126
| assembled_house.stl | 18.4MB | |
| assembled_house_without_upper_floors.stl | 14.5MB | |
| assembled_house_with_chimney.stl | 18.7MB | |
| brick_ground_floor.stl | 9.0MB | |
| brick_ground_floor2_fixed.stl | 55.7MB | |
| brick_ground_floor3.stl | 17.9MB | |
| brick_ground_floor4.stl | 19.0MB | |
| roof.stl | 44.2MB | |
| roof_with_chimney.stl | 44.6MB | |
| upper_floor.stl | 59.7MB |
