Mechspider 3D Printer Model
The file 'Mechspider 3D Printer Model' is (stl) file type, size is 15.2MB.
The file 'Mechspider 3D Printer Model' is (stl) file type, size is 15.2MB.
Printed on an Anycubic Photon S in:
Elegoo basic grey
.05mm resolution
9 sec. exposure time
8 bottom layers
60 sec. bottom layer exposure
1 sec. light-off delay
The gears make this a difficult print. The best orientation was found to be on its side and slightly angled toward the back.
| Mechspider.stl | 39.3MB |
