The file 'Mechanized Eye Of Agamotto 3D Printer Model' is (stl,ino) file type, size is 7.0MB.
This is a to-scale version of the Eye of Agamotto, with internal mechanisms for opening and closing via hand gesture.
When the sling ring is passed in front of the eye, a large bar magnet embedded in the ring triggers a reed switch embedded in the eye, sending a signal to a microcontroller on the back. the microcontroller powers up in internal Green LED and activates a micro servo, driving a gearset which opens the eyelids. The end result is the eye of agamotto opening its lids and revealing the "time stone".
a video of it's operation can be found here: https://youtu.be/0NlWNDc3s6E
Updates:
10/24/2021- added images of circuit and component diagrams, arduino code, and amazon links for components
11/4/2021 - added partial assembly/disassembly images and close-ups of servo gear and battery pack
13_tooth_metal_gear_servo_gear_no_hub_remeshed.stl | 115.1KB | |
13_tooth_metal_gear_servo_gear_remeshed.stl | 136.6KB | |
bottom_lid_modified_and_bolstered.stl | 2.5MB | |
cord_mount_remeshed.stl | 319.7KB | |
drive_bevel_gear.stl | 247.8KB | |
eyelid_bevel_gear_upscaled.stl | 900.3KB | |
eyestateswitch.ino | 3.4KB | |
eye_Servo_plate_v3.stl | 138.2KB | |
LED_diffuser_rough.stl | 2.7MB | |
LED_diffuser_smooth.stl | 928.5KB | |
magnet_sling_ring_6.stl | 889.9KB | |
magnet_sling_ring_7.stl | 1001.3KB | |
mechanized_base_back_remeshed.stl | 904.4KB | |
mechanized_base_face_remeshed.stl | 712.2KB | |
top_eyelid_modified_and_bolstered.stl | 2.5MB | |
top_face_remeshed.stl | 1.4MB |