For the right-hand version, just make a symmetry of "Body"
Print at a 100% infill to make the assembly strong enough to apply decent pressure on the portafilter.
There are several tamper diameters to choose from:
49.7mm
51mm
54mm
58mm
I used a 8 mm aluminium rod for the handle
| 49.7mm_tamper.stl | 136.0KB | |
| 51_mm_tamper.stl | 29.6KB | |
| 54_mm_tamper.stl | 29.2KB | |
| 58_mm_tamper.stl | 29.0KB | |
| axle_v2.stl | 158.6KB | |
| body.stl | 177.4KB | |
| lever_handle.stl | 593.1KB | |
| press_tamper_simplified_v7.f3d | 980.0KB | |
| Spur_Gear_20_teeth.stl | 1.2MB | |
| stand.stl | 450.0KB | |
| tamper_rack.stl | 176.9KB | |
| tamper_v2.stl | 60.5KB |
