Update - The Doors initially uploaded were previous versions. The new updated & correct size is now in the files.

This repair bay is inspired by the MW4 Repair Bay. Dedicated to a long time friend NC.Tracker.

No test printing has been done. Due to size and details, I recommend resin printing only. See Dimensions before printing. Smaller resin printers may not be able to print something as large as this.

Dimensions: 90mm width x 90mm depth x 91mm height.
Options to build are:
Repair Bay with Sliding Doors on Hexes(Hex Dimensions are 32mm)
Repair Bay without Doors on Hexes
Repair Bay with No Doors or Hexes

Door Opening is 35mm wide and 61mm in height. Maximum opening is 39mm wide.
Players can either slide a unit through the doors or drop it in/pick it up from the top.

Optional Cranes & Parts: (Should be able to print on any resin printer.)
There are five overhead crane options with one robotic arm and one cable driven lifter. The Cranes are set to slot into/onto the overhead front and back structure. This will allow any placement or sliding position you choose. Single and double options are set for each and you can choose to use none, one, or more should you desire. The Arm and Cable Lifter are separate so you can decide which you want to use. You can glue them on or merge yourself if you wish.

Door Panels: (Should be able to print on any resin printer.)
The primary sliding door and side panel are included. For the sliding doors, two will allow you to get into position as there is a track above and below allowing space to move but not fall out. The side panel is included if you want a larger door for personal tastes. However you may run into obstructions with surrounding terrain should you use the larger door.