This is a production video of the Mecanum Wheel RC car made using Arduino and 3D printing technology.
You can control and play the dynamic performance and control environment of the mecanum wheel.
It was modeled using Fusion 360 and wireless control is possible with Wi-Fi communication.
We hope that it will be a small inspiration for all makers who are eager to create creative RC mobile by referring to our contents.
For more information, refer to our blog and YouTube channels.
https://blog.naver.com/3dfuns/222522128692
https://www.youtube.com/c/3DFUNS
[Hardware parts used]
3DFUNS Pro Mini(Main Board) - x1
ESP-01 Wifi Module - x1
3DFUNS Contents Board - x1
MG90S Servo Motor(360) - x4
LED Board - x1
16340 Battery -650mAh
Mecanum Wheel(48mm) - x2 pair
[Application]
Roboremo
*We don't share the purchase link for the parts, so please don't ask.
Thank you.
| coupling_mecanum_wheel_d48.stl | 302.2KB | |
| mecanum_case_base.stl | 1010.9KB | |
| mecanum_case_front.stl | 1.8MB | |
| mecanum_case_lower.stl | 3.3MB | |
| mecanum_case_top.stl | 2.2MB | |
| mecanum_deco_2.stl | 110.3KB | |
| mecanum_deco_back_l.stl | 156.4KB | |
| mecanum_deco_back_r.stl | 150.7KB | |
| mecanum_deco_front.stl | 442.9KB | |
| mecanum_wheel_cap.stl | 400.5KB | |
| mecanum_wheel_motor_guide.stl | 78.0KB | |
| mecanum_wheel_pcb_main.stl | 321.6KB | |
| mecanum_window_front.stl | 285.7KB |
